In case of a parapet < 100 mm, a toe board must be provided.
- Aluminum toe board H 180 mm
- Toe board support for BE base
- Toe board joint fixation: 2 M8×10 mm stud screws
- Toe board angle fixation: 2 M8×10 mm stud screws
Protección colectiva : M-SAFE / Aluminium railing with fixing on dry sheet metal roofing
MM Aluminium railing with fixing on dry sheet metal roofing
NF E 85-015 : 2019 - EN ISO 14122-3 : 2016
The M-SAFE aluminium railing with fixing on dry sheet metal roofing allows the adaptation of inaccessible metal terraces for public use. It is fixed directly onto the sheet metal with a minimum thickness of 40/100, thus avoiding any cutting or repair of the waterproofing. It adapts to corrugations between 100 and 500 mm in any direction of the sheet.
The M-SAFE railing is easy to install:
- Handrail fixing system, using a plastic cap
- Hole in the uprights for fixing the intermediate tubes
- Handrails and intermediate tubes delivered in packs of 7 and 5 units, assembly using reduced ends
Handrail Ø Screw
Upright cap with fixing system
Knee-rail = Two options
Knee-rail through the uprights
Adjustable knee-rail
Bases
NEW: The inclination of the railing is ensured by the base, available in straight or 25° inclined versions
Unique design on the market = The base adapts to corrugated sheets up to 500 mm and can be installed in both directions on the sheet.
Straight steel sheet base
Inclined steel sheet base at 25°
Fixing
Fixing to the sheet with 5 Drilinox DBS2 screws with waterproof washers and chimney washers.
The Drillnox DBS2 6×2’7 screw expels material inwards, forming a burr, which increases the implantation length.
The threading torque is high even on thin materials (> 5 N.m compared to an average of 1.5 N.m for standard self-drilling screws).
Toe-board option
Installation (See instructions)
- Distance between uprights: 1500 mm max
- Maximum roof slope: 15°
- Self-drilling screw 4.8×32 mm hexagonal head:
- -Fixing the intermediate tube to the upright
- -Fixing accessories (angle, cap, end cap) to the handrail and intermediate tube
- -Fixing the reduced ends of the handrail and intermediate tube
- CHC screw 8×45 (pre-assembled):
- -Screwing the base to the upright
| Ref. MM | Aluminium railing with fixing on dry sheet metal roofing With standard uprights fitted with a hole for the intermediate tube |
|---|---|
| MM-S2 | M-SAFE railing with fixing on dry sheet metal roofing, straight uprights, handrail, and intermediate tube |
| MM-S3 | M-SAFE railing with fixing on dry sheet metal roofing, straight uprights, handrail, intermediate tube, and toe board |
| MM-S4 | M-SAFE railing with fixing on dry sheet metal roofing, straight uprights, handrail, two intermediate tubes, and toe board |
| MM-I2 | M-SAFE railing with fixing on dry sheet metal roofing, inclined uprights, handrail, and intermediate tube |
| MM-I3 | M-SAFE railing with fixing on dry sheet metal roofing, inclined uprights, handrail, intermediate tube, and toe board |
| MM-I4 | M-SAFE railing with fixing on dry sheet metal roofing, inclined uprights, handrail, two intermediate tubes, and toe board |
| Ref. MMA | Aluminium railing with fixing on dry sheet metal roofing With uprights without a hole for height-adjustable intermediate tubes |
|---|---|
| MMA-S2 | M-SAFE railing with fixing on dry sheet metal roofing, straight uprights, handrail, and intermediate tube |
| MMA-S3 | M-SAFE railing with fixing on dry sheet metal roofing, straight uprights, handrail, intermediate tube, and toe board |
| MMA-S4 | M-SAFE railing with fixing on dry sheet metal roofing, straight uprights, handrail, two intermediate tubes, and toe board |
| MMA-I2 | M-SAFE railing with fixing on dry sheet metal roofing, inclined uprights, handrail, and intermediate tube |
| MMA-I3 | M-SAFE railing with fixing on dry sheet metal roofing, inclined uprights, handrail, intermediate tube, and toe board |
| MMA-I4 | M-SAFE railing with fixing on dry sheet metal roofing, inclined uprights, handrail, two intermediate tubes, and toe board |