Safety Cage Ladders M-Ladder / Landing Kit

Landing Kit

Landing Kit The landing kit is designed to provide safe access to terraces and rooftops. Its installation is mandatory according to current regulations.

The recommended tightening torque is 10 Nm.

Within the M-LADDER landing kit range, you will find:

  • 300 mm landing kit
  • 500 mm landing kit
  • 800 mm landing kit
  • 1000 mm landing kit

For securing the landings to sheet metal roofs:

  • The ladder must rest on the ground (with a freestanding kit or a floor fixing kit).
  • Vertical loads must be transferred to the landing. We advise against using 300 mm and 500 mm landings as cantilevered structures unless properly fixed. Recommended tightening torque: 5 Nm.
  • The sheet metal roof support must be installed according to the rules and instructions of the sheet metal roofing manufacturer. Installation must be carried out by qualified personnel to ensure proper fastening of the supports to the sheet.
  • The installer must check the condition of the sheet (absence of corrosion and correct fixation).

REF. 34341
LANDING KIT 300 MM 

REF. 34302
LANDING KIT 500 MM

REF. 34342
LANDING KIT 800 MM 

REF. 34343 
LANDING KIT 1000 MM

REF. 34341
LANDING KIT 300 MM 


Face exit not included in the kit.

NºDescriptionRef.MaterialQtyWeight
1M10 washer34091Stainless steel25,7 Kg
2Landing upright34045Aluminium 606325,7 Kg
3Landing crossbar34039Aluminium 606345,7 Kg
4300 mm landing walkway34125Aluminium 606315,7 Kg
5Grey cap34307Polypropylene25,7 Kg
6Landing plate36078Steel S235 + anti-corrosion treatment45,7 Kg
7Landing crossbar joint34052PA + UV85,7 Kg
8M10 x 50 mm screw36256Stainless steel25,7 Kg
9M10 x 40 mm screw36257Stainless steel205,7 Kg
10Serrated flange hex nut33243Stainless steel205,7 Kg

REF. 34302
LANDING KIT 500 MM


Face exit not included in the kit.

NºDescriptionRef.MaterialQtyWeight
1M10 washer34091Stainless steel210,20 Kg
2Right landing reinforcement33998Aluminium 6063110,20 Kg
3Left landing reinforcement33999Aluminium 6063110,20 Kg
4Landing upright34045Aluminium 6063210,20 Kg
5500 mm landing crossbar34040Aluminium 6063410,20 Kg
6500 mm landing walkway34124Aluminium 6063110,20 Kg
7Grey cap34307Polypropylene210,20 Kg
8Landing plate36078Steel S235 + anti-corrosion treatment210,20 Kg
9M10 x 40 mm screw36257Stainless steel810,20 Kg
10M10 x 50 mm screw36256Stainless steel210,20 Kg
11Serrated flange hex nut33243Stainless steel2210,20 Kg
12Landing crossbar joint34052PA + UV810,20 Kg

REF. 34342
LANDING KIT 800 MM


Face exit not included in the kit.

NºDescriptionRef.MaterialQtyWeight
1M10 washer34091Stainless steel29,10 Kg
2800 mm landing crossbar34041Aluminium 606349,10 Kg
3800 mm landing walkway34123Aluminium 606319,10 Kg
4Landing plate36078Steel S235 + anti-corrosion treatment49,10 Kg
5M10 x 40 mm screw36257Stainless steel89,10 Kg
6M10 x 50 mm screw36256 Stainless steel29,10 Kg
7Serrated flange hex nut33243Stainless steel229,10 Kg
8Landing crossbar joint34052PA + UV89,10 Kg

REF. 34343
LANDING KIT 1000 MM


Face exit not included in the kit. 

NºDescriptionRef.MaterialQtyWeight
1M10 washer34091Stainless steel211,10 Kg
21000 mm landing crossbar34042Aluminium 6063411,10 Kg
31000 mm landing walkway34122Aluminium 6063111,10 Kg
4Threaded landing plate36078Steel S235 + anti-corrosion treatment411,10 Kg
5M10 x 40 mm screw36900Stainless steel811,10 Kg
6M10 x 50 mm screw36901Stainless steel211,10 Kg
7Serrated flange hex nut33243Stainless steel2211,10 Kg
8Landing crossbar joint34052PA + UV811,10 Kg

FACE EXIT INSTALLATION PRINCIPLE

Face exits are marked with a label indicating the correct orientation.
The arrows must always point toward the parapet.

LAST HOOP INSTALLATION PRINCIPLE

Reusing the aluminium anchor point from the bracing kit

The hoop is fixed to the face exit using one M10 x 50 mm screw and one M10 serrated flange hex nut included in the landing kit.

With a single screw, the face exit, landing and hoop are joined together.

M10 x 50 mm screw + M10 serrated flange hex nut